Inspection Device Parts & Accessories

Compare

Gfci For Seesnake

Item#:

R71637

Manufacturer:

RIDGID

Your Price:

121.78

Piece 1 Unit

Qty:

Compare

SeekTech Inductive Signal Clamp

The RIDGID SeekTech Inductive Signal Clamp accessory allows users to apply a signal to a cable or pipe that is 119 mm (4.7 in.) or less in diameter when it is not possible to connect transmitter leads directly to the target conductor. When its jaws are closed around the cable or pipe, the clamp couples the transmitted signal onto the conductor by induction. Once the signal is applies to a conductor, it can be traced using a compatible receiver, such as the SeekTech SR-20, SR-24 or SR-60.

Features

Induces a signal onto a cable or pipe less than 119 mm (4.7 in) in diameter
Compatible with all RIDGID SeekTech line transmitters, including the ST-305, ST-305R, ST-33Q+, and ST-510
Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz

Can be used with frequencies from 8 kHz to 262 kHz

Removable and easy to store coiled cord

Ergonomic handle for easy opening and closing

Convenient pull tab for opening and closing in tight spaces

Specifications

Weight	0.5 kg (1.1 lb)
Height	264 mm (10.4 in)
Width	148 mm (5.8 in)
Depth	36.8 mm (1.5 in)
Inside Diameter	119 mm (4.7 in)
Cord Length	0.75 m (2.5 ft)
Power Source	Line transmitter with 10 watt or less max output power with frequency < 45 kHz, or 1 watt max if > 45 kHz
Frequencies	8 kHz to 262 kHz